New!! Small Efficient cool running Voltage Regulator available in 2.5amp Max or 4.5amp Max.
If your project consists of circuits that need to run at different voltages,
our regulators are the solution.
The Model S-VR-3 can provide a constant maximum of 2.5 Amps of current
provided your source power supply can supply it.
Example usage:
Lets say you have an old laptop power supply lying around.
It is rated at 14v 5amp, but your circuit board requires 9v.
Plug your 14v power supply into the input of our regulator
and adjust it to step down to 9v. Connect your 9v board to the output of
our regulator and have a max of 2.5 amps of current available.
You will need multiple regulators if you need to step down multiple
different voltages.
Note: If you connect a power source that is less than 2.5 amps to
the input of the regulator, it will not boost it to 2.5amp.
Measures Approximately 43mm x 20mm x 14mm .
Input 3.2v - 24v output 1.25v - 22v
Requirements:
A voltmeter to measure your desired output voltage.
Package Contents:
1 x Voltage Regulator with soldered connections.
2 x connections.
1 x Detailed paper instructions.
We only have a small supply of these on hand at the moment.
The Model S-VR-5 voltage regulator can provide a constant maximum of 4.5
Amps of current provided your source power supply can supply it.
Note: If you connect a power source that is less than 4.5 amps to
the input of the regulator, it will not boost it to 4.5amp.
Measures Approximately 53mm x 23mm x 16mm
Input 4v - 24v output 1.25v - 22v
Package Contents:
1 x Voltage Regulator with soldered connections.
2 x connections.
1 x Detailed paper instructions.
We only have a small supply of these on hand at the moment.
If the Item is out, you may email a request TO:
sales@starling-tech.com
