Custom Built in the USA.
New for 2024
Designed to plug into the chest of the 1/6 scale Moebius B9 model.
The kit works with the seamless Bubble :)
Starling proudly introduces the "Golden Boy Edition"of
our latest Plug-N-Play
Life Force Light and Sound kit,
The B9 2.0 Life force Unit.
Completely designed to fit and bring the most Life like effects
to the Moebius 1/6 B9 Robot, there is no better or easier way to
add light and sound to your model.
Powered by 4.5v battery power. Rechargeable 3xAAA batteries were tested and lasted 22hrs running continuously.
All kits are completely tested before packaging.
There is no soldering and no need to add any other lighting as
they are all set up in this kit.
Our miniature circuit board plugs right into the chest and provides
many effects that are listed below including our
"No show " switch or pushbutton design.
Features:
This amazing effect features everything a fan of Lost In SpaCe
could want from the Golden Boy version.
- Plug-N-Play B9 2.0 Life force Unit with all flashing and non flashing chest LEDs integrated into board.
- Perfectly synced Light to Sound voice box using our bright Glow tube.
- 3xAAA Battery harness.
- Speaker and high quality sound board pre-loaded with 18 Golden boy phrases.
- Installed 0402 LEDs for the Brain.
- A No Show switch or pushbutton design.
- Easy to follow detailed installation instructions with many photos sent via email.
- Optional voice activation RC control available.
- Optional mechanical sound sound board available.
Requirements:
- Normal modeling tools.
- Favorite glue and clear epoxy.
- Small piece of .010, .020 polystyrene white sheet or card stock.
- Small pieces of Clear polystyrene sheet (optional.)
- Paragrafix 1/6 B9 photo-etched kit (optional.)
- Any 3x AAA Batteries. (Rechargeable recommended.)
Runs on 4.5volt (Not included)
Moebius 1/6 scale model not included.
Add batteries and you can play with the entire kit straight out of the package.
Golden Boy Completed by Landon Montgomery.
NOTE: this kit is the same exact kit as our original
B9 2.0 unit except for having the Golden Boy audio.
Please visit here for our original B9 2.0 kit.
Please choose the Golden Boy Editon from the list below.
RC Unit: This option must be added to kit before shipping.
Operate voice activation by RF with this option.
$31.00
Mechanical Sounds option:
This optional sound board allows you to run the robots mechanical sounds in the background. Sound Board harness plugs into the back of the Life Force Unit.
Requires THE B9 2.0 1/6 kit above to power it.
$31.00
Optional 4.5v wall adapter with harness.
Power your B9 with 110v wall power instead of batteries.
Provides continuous power
without the need for changing batteries.
A battery connector will still be included.
our latest Plug-N-Play Life Force Light and Sound kit,
The B9 2.0 Life force Unit.
Completely designed to fit and bring the most Life like effects
to the Moebius 1/6 B9 Robot, there is no better or easier way to
add light and sound to your model.
Powered by 4.5v battery power. Rechargeable 3xAAA batteries were tested and lasted 22hrs running continuously.
All kits are completely tested before packaging.
There is no soldering and no need to add any other lighting as
they are all set up in this kit.
Our miniature circuit board plugs right into the chest and provides
many effects that are listed below including our
"No show " switch or pushbutton design.
Features:
This amazing effect features everything a fan of Lost In SpaCe
could want from the Golden Boy version.
- Plug-N-Play B9 2.0 Life force Unit with all flashing and non flashing chest LEDs integrated into board.
- Perfectly synced Light to Sound voice box using our bright Glow tube.
- 3xAAA Battery harness.
- Speaker and high quality sound board pre-loaded with 18 Golden boy phrases.
- Installed 0402 LEDs for the Brain.
- A No Show switch or pushbutton design.
- Easy to follow detailed installation instructions with many photos sent via email.
- Optional voice activation RC control available.
- Optional mechanical sound sound board available.
- Normal modeling tools.
- Favorite glue and clear epoxy.
- Small piece of .010, .020 polystyrene white sheet or card stock.
- Small pieces of Clear polystyrene sheet (optional.)
- Paragrafix 1/6 B9 photo-etched kit (optional.)
- Any 3x AAA Batteries. (Rechargeable recommended.)
Moebius 1/6 scale model not included.